CFMOTO ZFORCE 800/950 (Generation 2) snow plow mount for UTV side by sides by KFI.
NOTE: Refer to attached instructions. Recommended to also purchase Plow Pulley (#105270 if using STEEL cable, or #106270 if using SYNTHETIC rope).

2023-2026 - ZFORCE 800 Trail (Gen. 2)

2023-2026 - ZFORCE 950 Trail (Gen. 2)

2023-2026 - ZFORCE 950 Sport (Gen. 2)

2024-2026 - ZFORCE 950 Sport 4 (Gen. 2)

• 100% MADE IN USA
• Front-mount System (fits KFI plows only, not other brands)
• Plate constructed from 3/16” grade 50 steel
• All pin tabs are constructed from 1/4” thick grade 50 steel
• All plow tabs are tapered to help reduce hang-ups while trail riding
• Powder coated black for supreme durability
• Complete installation instructions included
• All mounting hardware included (NOTE: Requires drilling)
• Pin tabs for plow mounting are 12" width center-to-center

NOTE: Failing to follow the below safety rules will greatly increase the chances of damaging your plow system, machine and/or winch (if applicable). KFI will not be liable for any bending of materials as it is not caused by imperfections or defects in the material but by failing to follow these safety rules:

• Do not exceed 5 MPH, even with the blade raised.
• Make sure that all nuts and bolts are tightened per installation instructions.
• Never operate this KFI product with missing or damaged parts.
• Drive slowly over bumpy and rough terrain, driving fast could cause damage to winch (if applicable) or plow.
• Never raise the plow above point of contact as it could cause damage to machine or winch (if applicable).
• Always perform regular inspections and maintenance on plow system and hardware before use.
• Operate with extreme caution on slopes, steep grades, and rough terrain.
• Be aware of any possible hidden objects under the snow.
• Do not ram the blade into the snow pile.